Despite signing up for them at every opportunity, it’s been an awfully long time since I’ve managed to get round to make a soap for Amy Warden’s monthly Soap Challenge Club over at Great Cakes Soapworks. This month’s challenge really piqued my interest though, and I was determined to give it a go. The challenge was to create a soap using the Spinning Swirl technique (which I hadn’t come across before) and, after months of making nothing but restocks, I was keen to try something a bit different. This technique involves pouring very fluid soap batter into a slab mould and then spinning the mould itself. Amy provided a great video tutorial, and this one of the soaps that she made to illustrate the technique:
One of the stipulations of the challenge was that the soap had to made in a slab mould, which I don’t own. So my first challenge was to improvise a slab mold. A shoe box did the trick:
I prepared my colourants. The fragrance oil is described as a creamy, powdery, honey fragrance, and I wanted warm colours to reflect that. I used Radiant Gold mica, Sicilian Orange mica and Red iron oxide and mixed them with a little of the oils (to which I’d already added the fragrance).
I added the lye to my usual oils and butters, and then poured the batter equally into the three jugs, stirred well then stick blended very VERY briefly (as I needed it to stay fluid for as long as possible):
I poured the soap into the mould, alternating colours in a faux-funnel type pour:
Once the soap was all poured, I gritted my teeth, gripped the mould with both hands, and started to rotate the mould as quickly and as firmly as I dared while praying that it wouldn’t all slosh out onto my table. After making probably about 20 full rotations, I swirled the top with a skewer and put it aside to firm up. A couple of days later I unmolded and found this left behind in the diy mould:
THAT is why I love my silicone moulds so much 😀 Anyway – the unmolded soap didn’t look too promising:
Not only do I not have a slab mould, I also don’t have a cutter that can cope with a big ole slab of soap, so I had to make the first cuts with a Very Big Knife. Needless to say, I wasn’t particularly accurate:
And THAT is why I love my single wire Bud cutter 😀 Anyway, I was able to use my beloved cutter for the rest of the cuts:
And, after a little love and attention, I’m really happy with the result:
Many thanks Amy for organising the challenge! It was a real pleasure to try something new and I’m looking forward to seeing what the other entrants come up with.
All’s well that ends well eh? Beautiful soap.
This soap is so beautiful!!
Thank you Maya 🙂
Reblogged this on Scents of Serene Relaxation and commented:
Love the design
Thanks Denise – I wanted to get a sense of honey in the colours and perhaps went a little TOO warm, but I like it anyway 😉
Beautiful soap! Your lines are nice and thin – love it!
Thank you Eileen – pure chance over skill hahaha but I’m pleased with how it turned out.
This is so beautiful, Vicki!
Thank so much Natalia – was lots of fun to do!
Came out very nicely!
Thank you Cris – wasn’t too bad in the end 😀
Really cool looking soap!! I just love the movement and fluidity of the swirls with this technique. I think the 5 pools of soap was just right for your mold – even if you never use a shoe box mold again in your life! LOL!
A shoe box mould will never again see the light of day in my workshop Amy, that’s for sure – oh, unless you have more slab mould challenges coming up in the near future 😀 I do think it’s something I’ll have to invest in soon though.
Looks really good! You did a nice job with the swirls.
Thanks so much Monica!
You were very courageous to through all this, but what a great result!
😀 thank you Valerie for your kind comments
Thank you Yvonne, yours is lovely too – good luck!!
Vicki, I love the colors you used! And the swirls are so fluid – awesome. My favorite part of this technique was the horizontal slice – it is so amazing to see the inside of these spin swirl soaps!!
Your soap’s swirls and colors are soft and warm–just what you were going for. Bravo! I love your shoe box slab; I have several and can’t bring myself to toss them out now that I have a couple wooden slab molds with dividers. The humble shoe box is a loyal, trusted servant.
Ha ha thank you Leela! I think I’ve become too reliant on my silicone moulds to line properly these days!
This really is so pretty Vicki, and I bet the fragrance is just amazing. The creamy honey fragrance you describe would go perfectly with these wispy swirls. I know what you mean about the woes of cutting a slab of soap though. I did the horizontal cut of mine using a wire cutter, which I am so thankful to have!
Thanks Lisa! I’m thinking of getting a slab mould now, but its the cutting that’s making me delay, though the dividers do seem to work well. Hmmmmm…
You poured this really nicely and got those lovely thin swirl lines. I think this technique works really well when you do that as it gives the bars lots of interest. I like the colour choice (partially because I chose Orange and yellow for mine too!)
Thanks Claire! I’ll head over and check yours out later when the kids are otherwise engaged 😀
I’ll have to try this this weekend! I have a ton of sewing to do but this is going to bother me until I try it! LOL
Very nice, I like your thin swirls and your colour choice – goes well with the “warm” scent.
Thanks Barbora – it was a bit of a risk using a new fragrance, but I think it works 🙂
Wow – that turned out so cool Vicki, amazing job! 🙂
Oh thank you Cee! So looking forward to your tutorial for the next challenge! I’m not sure I’m going to have the time to create an entry this month, but I’ve signed up nevertheless so we’ll see 😀
Very pretty, Vicki! I’ll have to give the spinning swirl a try someday.
It was good fun Jenny – I’d recommend giving it a whirl (sorry, couldn’t help myself :-D)
So pretty! I haven’t tried the Spinning Swirl before, but your soap makes me want to give it a try now. 🙂
Definitely give it a go if you get the chance – was fun to try something different 🙂 Look forward to seeing what you come up with!