Titanium Dioxide Archives

Posted on May 2, 2017 by Vicki — 8 Comments

When Fragrance Oils Go Rogue

My hands-down-most-popular summer special last year was my Lemon Verbena Confetti, so obviously I had to make it again this year. It has a white base colour, is crammed with multi-coloured soap shavings and is fragranced with an amazing smelling Lemon Verbena fragrance oil. I LOVE lemon verbena – it’s fresh, crisp and citrussy with herbaceous notes, but sadly, this particular lemon verbena fragrance does NOT behave itself in cold process soap.

I knew from my experience using last year that it was a fast mover, so I thought I was well prepared this time. The soap shavings were ready to go, the oils and lye were at room temperature, I didn’t discount the water, and was prepared to work quickly. It wasn’t enough…

Soap shaving ready to be added... — Soap shaving ready to be added…

I added my titanium dioxide AND the Lemon Verbena FO to to my oils, added the lye water and KAPOW! it solidified immediately. I refused to be beaten. I splodged the stick blender in and loosened it up a bit before adding all the soap shavings. How much soap shavings you use is entirely up to you – I don’t measure it out, I just mix in more and more until it looks like enough <not helpful sorry>:

I mixed as far as I could with a spoon but in the end I had to plunge in my (gloved!!) hands to give it a thorough mix. It was the only way to get everything properly combined without breaking up all the soap shreds with the blender. I also used my hands to get the whole lot into the the moulds (one benefit of making confetti soap – two batches with added confetti makes enough soap to fill three moulds – yey!)

It was only then that I realised that one of my gloves had split and I had the beginnings of a lye burn on the end of one of my fingers – ouch 🙁

Two days later I unmoulded and cut, and the result wasn’t too shabby:

It has a few small air holes here and there, trapped during the mould filling, but it’s pretty good, considering!

Incidentally, the company from whom I bought this FO claim on their website that it causes no acceleration in CP soap, but when I asked in a FB group whether anyone else had had an issue with this particular FO, it seems to be fairly common. Ah well, forewarned is forearmed eh?!

Posted on October 10, 2016 by Vicki — Leave a comment

Makeovers (6. Clarity)

Blogtober Day 10. Day 10 folks!! A third of the way through, nearly…

Anyway, this the sixth in an occasional series on the evolution of Soap Mine soap designs. Previously I’ve covered Serenity, Wake Up! (discontinued), Tutti Frutti,Delicious and Luscious Lavender, and this time it’s the turn of ‘Clarity’, fragranced with a gorgeous fresh blend of Lemongrass and Clary Sage Essential Oils.

This one has proved to be one of my bestsellers over the years, and I’ve been making it for a long time, so please forgive the quality of some of the photographs. I’ve said it before but soap photography is as steep a learning curve as soap making!

First came the two color version – a cool grey base with lime green drops:

I wasn’t overly enamoured with with the grey, so soon after it became a three colour bar, with a green base and white and black drops.

When I started adding texture to the tops, Clarity was included of course:

And so it was, for many, many batches. But then one day, very recently, I decided to ring the changes and, drum roll please…Ta da! This is the new look for Clarity:

The black base of the bar is coloured with activated charcoal, purported to be excellent for your skin. I found this post recently which talks about the benefits of activated charcoal in soap, but of course, I make no medical claims for my soap whatsoever! 😉

Posted on January 27, 2016 by Vicki — 1 Comment

Makeovers (5. Lavender)

New Year is generally a time for looking forward for me (I’m still working on those 2016 business goals I touched on in my last post) but last week I was browsing and sorting (supposedly – I’m easily distracted 😉 ) through my HUGE collection of soapy photographs and I came across some from the early days. I can remember being SO proud of this one – my first every straight lavender essential oil soap:

Note the rounded corners – I hadn’t yet discovered the joys of silicone liners lol… You can also see the signs of a partial gel here too.

It wasn’t long before I began standardising (and simplifying) the swirls, and this was the next incarnation – an In The Pot (ITP) swirl:

I went through a phase of experimenting with mica in oil swirls on the top of the bars – though I’m not sure why I thought this was a complementary colour for the top-swirl…

When it came to developing a cohesive range I decided to make all my essential oil soaps with a drop swirl, and so came up with this two colour lavender drop in a white base:

The colours have remained the same ever since – I use titanium dioxide for the base and two micas called ‘grape’ and ‘lilac beauty’ for the drops:

Luscious Lavender #4 — Luscious Lavender #5

Luscious Lavender #5 — Luscious Lavender #6

Thanks for checking in – I really do hope to be back soon with those 2016 goals!

Posted on September 15, 2015 by Vicki — 26 Comments

The ‘Clyde Slide’ Challenge Soap

This month’s challenge for Amy Warden’s monthly Soap Challenge Club over at Great Cakes Soapworks is to create a soap using the ‘Clyde Slide’ technique. The Clyde Slide is named after Clyde of Vibrant Soaps, who uses this technique to create beautiful (and exquisitely coloured) soaps – do check out his videos on YouTube if you get the opportunity.

As I’ve just started production of this year’s Christmas soaps, I decided to design my challenge soap around a fragrance oil called ‘Yule Log’. It’s a chocolately, almondy, cakey fragrance, with notes of cinnamon, ginger, vanilla and musk and is delicious out of the bottle. How does it smell in soap? I’d love to tell you but, um, well, I forgot to add it. Oh well, sensitive noses deserve pretty soap too don’t they?

I used a light brown mica as the base colour, to represent the sponge, and dark brown mica, titanium dioxide (white) and red liquid colourant for the cream, chocolate and holly berries elements. I did consider using a little green too for the holly leaves, but in the end I’m glad I didn’t.

I prepped the soap batter and added the colours, making sure I kept the batter at a light trace:

Then I poured the white, red and dark brown soap batters into the bowl containing the lighter brown soap. I completely forgot to take a photo of this stage, but I used exactly this pattern (this was my second attempt):

Usually, when I use the ‘In the Pot’ technique, I would now give the pot a quick stir, just once or twice, but I always stir before pouring. For a Clyde Slide, you DO NOT stir. I can’t tell you how much I wanted to stir!!

Here it is mid-pour:

Then I swirled the top:

And two days later, Ta Da!! My unscented Yule Log Clyde Slide:

And here’s a close up to show the trademark ‘Clyde Slide’ feathering – it’s not a blurred photo, honest :-D:

Many thanks to Amy for her major feat of organisation (apparently there are over 180 entrants this month!), I’m really looking forward to seeing all the other entries. Good luck if you’ve entered!

Posted on August 30, 2015 by Vicki — 4 Comments

Two months later…

Yep, it really has been almost 2 months since my last post. The summer season has been incredibly busy, and it’s been as much as I can do to keep up with demand on the soaping front. Days have been spent keeping the children occupied during what seems to have been the wettest summer on record, and evenings have been spent making, wrapping and labelling soaps to supply the eleven local retailers that now stock The Soap Mine soaps. Since April I’ve also been doing twice monthly soapy talks for a local holiday company, and have done a couple of soapmaking demonstrations for the Women’s Institute – something I’d really like to do more of.

Needless to say there isn’t much innovation or new designs to share from the last couple of months, but I do have one new one to share. Now I do love my colours and swirls, but my mum has long expressed a preference for a plain, white, citrussy bar, and I finally got round to making one for her. The only colourant is a touch of titanium dioxide, and it’s fragranced with a smidgen of lemon & grapefruit essential oils. (The prototype was fragranced with lemon & lime, but I much prefer lemon & grapefruit combo).

I’ve named it ‘Peace’ and it’s proved a hit with customers as well as mum, so I’ve added it to the regular line-up.

There was one other exciting soap related event over the summer. I was honoured to be able to host an international soap swap between myself and 11 other amazing soapmakers from the US, Canada and Europe. I’ve got a couple of posts coming up soon just about the soap swap, but here, to whet your appetite, is a little teaser of my haul, If you’re a fan of handmade artisan soaps you may well recognise some of these brands…

Thanks for reading, I’ll be back soon 🙂

Posted on July 2, 2015 by Vicki — 11 Comments

Taming the Vanilla

I’m going to quickly gloss over how long it’s been since I last posted and share a soapy pic – ‘cos that’s what you’re here for right? 😉

Soap fragrance oils containing vanilla are often considered tiresome because of their propensity to discolour and potentially ruin a carefully designed soap. But they smell so good! I absolutely love the smell of ‘Pink Kisses’ from Gracefruit, but my first attempt at using it was a complete disaster. It was early on in my soaping career, and discolouration wasn’t even on my radar. I used a selection of pretty pink colours and was so excited to see what it would look like, so imagine my disappointment…

Looks ain't everything! — Looks ain’t everything!

Every failure’s a learning opportunity eh? 😀

Four (!!) years on and I decided to give it another go – this time I was a little more careful with my design. Splitting the batter into two, I coloured one half with Orchid Pink Mica, and added the fragrance oil to the other other portion only, adding a little Titanium Dioxide to mitigate the effect of the vanilla. This was the result:

First Kiss Cold Process Soap — First Kiss

Needless to say I’m so much happier with this one. I think the browning effect of the vanilla actually improves the look of the bar and gives it some depth and interest.

I hope you’ll agree that my photography skills have improved a little too 😀 😀 😀

Posted on February 13, 2015 by Vicki — 5 Comments

Parisian Flora

The last few weeks have been full-on soapmaking to restock the shelves depleted by the pre-Christmas rush. I only have two loaf moulds, and can only soap in the evenings once the little Miners are asleep, so it’s a fairly long drawn out process involving nightly soapmaking (what a shame :-D!) but I’m getting there.

This is Parisian Flora. A drop swirl fragranced with a blend of Lavender, Ylang Ylang and Rose Geranium essential oils, and coloured with titanium dioxide and micas.

Posted on January 17, 2015 by Vicki — 14 Comments

Makeovers (1: Serenity)

Quite a few of my soaps have had a makeover recently. No matter that I have (more or less) a set range of fragrances & designs, there’s always room to improve and to flex those creative muscles.

One of the most popular essential oil soaps that I sell is Serenity. The fragrance is a blend of Bergamot, Patchouli, Orange and Ylang Ylang essential oils. The very first time I made a full batch of this one I carefully weighed out the appropriate amount of essential oil blend for the amount of soaping oils used, then put it to one side. I then split my batter into three, coloured one white and two different shades of blue, then poured the soap into the mold, creating what I fully expected to be an awesome drop swirl. Except I’d forgotten to the add the fragrance. Argghhhh! There was nothing to do but scoop it all out, thoroughly mix in the essential oils, and put the whole lot back into the mould. Of course I ended up with a very plain, pale blue bar of soap which smelled amazing but looked nothing like my original plan:

Serenity Take 1 — First incarnation of Serenity

The next few times I made Serenity, I decided to go with a single colour drop in a paler background. Most of my drop swirls up to this point had been a white soap with coloured drops, but I wanted to try something a little different. Here I used Icelandic Blue mica for the base colour and Denim Blue mica for the drop:

The second incarnation of Serenity — Second incarnation of Serenity

I used that design for a while, and it sold well enough, but it didn’t wow me, and last year I decided it needed updating. The current Serenity has a base of Icelandic Blue mica, and drops coloured with Titanium Dioxide and Blue Dragon mica. I think it’s rather pretty and goes well with the name, so this design will be staying (for now anyway :-D)

Posted on April 23, 2014 by Vicki — Leave a comment

…and two months later…

Wow, I realised on Monday that it was exactly two months since I last posted on here. TWO MONTHS!! I knew I’d take a bit of time out while we packed up our home and made the move to Wales, but I didn’t realise I would neglect the blog so thoroughly – so sorry!

Anyway, we’ve left the big city and are now settling into a much more rural way of life. This is the amazing view from my bedroom window:

Not bad eh? We’re still staying with my mum, who has kindly allowed her peaceful home to be invaded by our family of four (thanks mum!) but we’re in the process of buying our new home – in the same village – yippee!

Needless to say the majority of our belongings are still boxed up and in storage and I’ve not been able to make soap BUT I decided last night that enough was enough – I had to get back to it. Mainly because a) I miss it, hugely and b)The Soap Mine is getting seriously low on stock…

So, I dug out all my soaping gear, whisked up a simple 3 colour ITP (in the pot) swirl (and oh oh oh loved every minute of it :-D):

Delicious is scented with a dupe of DKNY’s Be Delicious fragrance, and smells utterly gorgeous. Coloured with two shades of green mica and titanium dioxide. Cut pics to follow soon.

Posted on February 21, 2014 by Vicki — 32 Comments

Anyone for Embeds?

This month’s challenge over at Amy Warden’s Great Cakes Soapworks was to make a soap with embeds, ie soap with different shaped/coloured soap embedded within in it. One of the examples Amy used in her tutorial was this beauty:

Isn’t it gorgeous?

I wasn’t going to enter the challenge this month as we move next week (are you bored of hearing about it yet? 😉 ) but I do like getting involved so decided to whip up something simple at the last minute, just so that I could take part. I’ve already taken a peek at some of the other entries and there are some absolutely stunning creations, I’m a little embarrassed to post my little simple soap, but hey ho – I might win the booby prize :0)

Back in 2012 I made a soap that was really popular, called Bubblicious:

and I thought it would be a quick and easy one to replicate for this challenge.

So I made up two small batches of soap and coloured one pink and one lilac. After about 24 hours I unmoulded them and started to roll different sized balls out of both colours:

This soon became ridiculously laborious and I realised I could probably get exactly the same effect if I rolled lengths of soap like these:

I then made up a larger batch of soap and added titanium dioxide to make it nice and white. I fragranced it with a lovely floral blend of Rosewood and Ylang Ylang essential oils.

I then simply poured a small amount of soap into the bottom of the mould, laid some balls in and covered them with the white batter, then repeated until the mould was full, making sure I kept enough balls back to decorate the top of the soap. Voila:

And here are the cut bars:

Very simple, but a nice effect nevertheless. There are so many ways to play about with this technique, I’ll definitely be making many more embed soaps in the future.

Thanks, as always, go to Amy Warden for organising the challenge and giving us all an opportunity to drool over each other’s creations :0)

Posted on December 18, 2013 by Vicki — 12 Comments

Ooops…

I made this soap a couple of months ago and it’s been a surprisingly good seller, despite its rather ‘plain jane’ looks:

Ordinarily I love my colours and swirls, and in my head this one was going to be a beautiful drop swirl design in shades of blue, a bit like this green one I made not so long ago…

but it wasn’t to be…

I usually soap at room temperature. To that end I generally mix up my lye solution and melt my hard oils and butters during the baby’s midday nap, so that they’ve cooled down nicely by the time both kids are asleep in the evening. I also weigh out my liquid oils and add them to the melted oils as well – this starts the cooling process and also makes the ‘hard’ oils and butters less likely to re-solidify as they cool.

So on this occasion I prepped everything as normal, and once the bedtime routine was finished I eagerly set to work. I combined the oils with the lye, added the essential oils (a blend of Bergamot, Patchouli, Orange and Ylang Ylang) then portioned out the batter and mixed in the colours (titanium dioxide, denim blue mica and ultramarine blue pigment). It was only after I’d poured all of the white portion into the mould that I realised that, even when I dropped in the two blues, I wouldn’t have anywhere near enough soap to fill the mould.

It only took a second or two for the penny to drop. For some reason I had skipped a step at lunchtime, and hadn’t added the liquid oils to the melted oils. My measured out liquid oils were still in a jug, put away safely to one side. Arrrgghhhhh! I couldn’t bear to waste a 3lb batch of soap, so did the only thing I could think of. All the mixed batter went back into a big bowl (oh the colours looked so pretty as I poured them in!) along with the liquid oils and I stick blended like crazy. The batter had originally behaved very well and traced beautifully (I’d had no indication that anything was amiss) so I had no idea whether it would work or not. I fully expected ricing, seizing or something equally frustrating but no, it all combined really well and I was able to pour my (by this stage) very plain, unicolour soap.

Despite everything, I’ve called it Serenity. The colour is very calming, and the fragrance blend is soothing and comforting. It’s funny how things turn out.

Posted on November 29, 2013 by Vicki — 8 Comments

Recent Makes

A very quick update with some recent creations.

First up is a restock of Luscious Lavender – an ‘In the Pot’ swirl fragranced with Lavender Essential Oil and coloured with Titanium Dioxide and Violet Ultramarine. It always surprises me how popular Lavender still is – this one’s already sold out!

This next one is Orange Sherbert. The batter thickened up VERY quickly but I still managed to do an ‘In the Pot’ swirl. I really like the resulting folds, but I’m not sure I would ever be brave enough to try to replicate it as I was <this> close to getting the proverbial ‘Soap on a Stick’ :0) Fragranced with Orange Sherbet FO from Gracefruit and coloured with Titanium Dioxide and Orange Mica.

Finally for today: Parisian Flowers. A deliberately uneven layered soap, fragranced with a heady blend of Ylang Ylang, Rose Geranium and Lavender Essential Oils. Coloured with Titanium Dioxide and a range of pink micas, with a mica oil swirl on the top.